Written with AI assistance and may contain mistakes. Verify against the official Transport Canada publications before relying on anything here.

PPL Tester

Flight plan equipment codes (Item 10)

Item 10 lists equipment as single-letter codes split by a slash (/) (TC AIM RAC 3.15.4):

Position Group
Before / COM, NAV, approach aid equipment
After / Surveillance equipment

Before the slash (common letters; full list: Table 3.9, TC AIM RAC 3.15.4.1):

Letter Meaning
N No COM, NAV or approach aid equipment for the route carried, or unserviceable
S Standard equipment carried and available: VHF RTF, VOR and ILS (Table 3.9 NOTE 1)

Add letters for other gear carried (TC AIM RAC 3.15.4.1, Table 3.9):

Letter Equipment Letter Equipment
C LORAN C R PBN approved
D DME T TACAN
F ADF U UHF RTF
G GNSS V VHF RTF
H HF RTF W RVSM approved
I Inertial navigation X MNPS approved
L ILS Y VHF with 8.33 kHz channel-spacing capability
O VOR Z Other equipment or capabilities carried

After the slash (common descriptors; full list: TC AIM RAC 3.15.4.2). Insert N if no surveillance equipment carried or it is unserviceable, or one or more of:

Letter Meaning
A Transponder Mode A (four digits, 4096 codes)
C Transponder Mode A (4096 codes) and Mode C
S Transponder Mode S, with both pressure-altitude and aircraft identification
E Transponder Mode S, with aircraft identification, pressure-altitude and extended squitter (ADS-B)

Letters that change meaning across the slash:

Letter Before / After /
S Standard VHF/VOR/ILS equipment Mode S transponder with altitude and identification reporting
C LORAN C Transponder with Mode A and Mode C
N None carried, or unserviceable (COM/NAV/approach aid) None carried, or unserviceable (surveillance)

Trap: reading S or C from the wrong side of the slash: unrelated meanings.

References


Practice